Tuya WiFi Temperature and Humidity Sensor

Description:

About the refresh rate.

1. The sensor uses a trigger mechanism. When the temperature or humidity changes to the set value, the sensor will report the data immediately. Usually, the data is refreshed once an hour.
2. The sensor cannot set the refresh rate of the data report.
3. The sensor cannot set the alarm. The alarm function is set in the APP.

If you need to refresh the data in real time, please purchase the USB powered version (TH06/TH16).
Temperature and humidity trigger mechanism in the automatic process
We used Edge Triggered (ET),
that is, the action can only be triggered if the condition crosses the set condition.
For example, turn on the light when the automatic setting temperature is higher than 25 ℃.

A.1. When the temperature rises from below 25 ℃ to 25 ℃, the automatic process can trigger the light on.

A.2. After setting the automatic process, the temperature is always above 25 ℃, and the lamp is not turned on.
For example, when the automatic temperature setting is less than 20 ℃, turn on the light.
B.1. When the temperature drops from more than 20 ℃ to 20 ℃, the automatic process can start the start lamp.
B.2. After the automatic process is set, the temperature is always below 20 ℃, and the lamp does not turn on.

When the battery is quickly discharged.

1. The correct battery type is not selected or the battery is mixed.
   
2. The sensor should be installed in a place where the ambient temperature or humidity changes dramatically. In this environment, the device will often start the network to transmit data.
   
3. The sensor is installed in a low temperature environment for a long time (such as below 0 ℃), and the battery performance will quickly decline at this temperature.
   
4. The sensor is installed in a place where the network signal is very weak. When the network signal is weak, the equipment will increase the signal transmission power, resulting in increased power consumption.
   
5. The equipment is exposed to high humidity for a long time, which may cause battery corrosion and electrolyte leakage.