Thermal imaging camera-multimeter 2 in 1, car detector

Description.

Note:

1. This product uses a resistive screen. It is recommended to use your fingernail or stylus when touching the screen.
   
2. To correct unevenness, a mechanical check calibration plate is installed in front of the thermal imaging detector, calibrated every 10 seconds to ensure more accurate measurements. Usually there will be a pause of about 1-3 seconds which is caused by the calibration of the thermal imaging detector. This is a normal phenomenon, please do not worry.

Features:

• 2-in-1 function: 2-in-1 Thermal Imager + Multimeter, switch between two functions with one click, compact and small size, lightweight and easy to carry.
  Touch Screen2.8-inch resistive touch screen, 320*480 resolution, with one-click function.
  
• Data transfer and PC software analysis: In USB mode, you can transfer locally saved thermal images and record multimeter measurement results with data chart. And display on PC with software.
  
• Multifunction: multimeter can measure DC voltage, AC voltage, resistance, diode, on/off, capacitance, etc.
  
• Battery management: built-in lithium battery supports USB charging, with auto screen off and auto power off functions.
• Wide application: can be used for PCB inspection and maintenance, power supply maintenance, electronic equipment maintenance, home appliance overhaul, is an ideal choice for electronics and maintenance professionals.

Parameters:

• Sensor: uncooled focal plane. 
  
• Image capture frequency: 16 Hz (ET11S); 20 Hz (ET12S).
  
• Pixeltemperature: 24*32(ET11S); 90*120(ET12S)FOV:55°(H)*35°(V).
  
• Radiation coefficient: 0.1-0.99 adjustable.
  
• Measuring range: -40~+300℃(ET11S); -20~+400℃(ET12S).
  
• Mode: automatic amplification. 
  
• Color Palette: Iron Red.
  
• Temperature measurement error: >0℃:±2℃/±2%; ≤0℃±5℃/±5%.
  
• Temperature display accuracy: 0.1℃/0.1°F. 

Multimeter parameters: 

• Maximum DC input voltage: 1000V.
  
• Maximum AC input voltage: 750V. 
  
• Maximum measurable resistance: 40 Mohm. 
  
• Maximum measurable capacitance resistance: 100 µF.  
  
• Duty cycle measurement range: 0.1%-99.9%. 
  
• Diode measurement range: 0-1.5V. 
  
• Maximum on-off detection resistance: 30 ohms. 

Counter:

• 4000 counters, update: 3 times per second (ET11S).
  
• 4000 counters, update: 6 times per second (ET12S).  

Other parameters: 

• Display screen: 2.8 inches 320*480. 
  
• Touch screen: resistive touch screen.
  
• USB interface: TYPE-C. 
  
• Memory capacity: 3.5 MB. 
  
• Image format: BMP. 
• Battery: Built-in lithium battery. 
  
• Storage temperature: -20~60℃.
  
• Operating temperature: 0-50℃. 
  
• Working humidity: <85%RH.
  
• Size: 134*69*25mm. 
  
• Weight: 125g.